Michael Biebl [Mon, 15 Feb 2021 23:18:50 +0000 (00:18 +0100)]
Downgrade a couple of warnings to debug
If a package still ships only a SysV init script or if a service file or
tmpfile uses /var/run, downgrade those messages to debug. We can use
lintian to detect those issues.
For service files and tmpfiles in /etc, keep the warning, as those files
are typically added locally and aren't checked by lintian.
Closes: #981407
Gbp-Pq: Topic debian
Gbp-Pq: Name Downgrade-a-couple-of-warnings-to-debug.patch
systemctl: do not shutdown immediately on scheduled shutdown
When, for whatever reason, a scheduled shutdown fails to be set, systemd
will proceed with immediate shutdown without allowing the user to react.
This is counterintuitive because when a scheduled shutdown is issued,
it means the user wants to shutdown at a specified time in the future,
not immediately. This patch prevents the immediate shutdown and informs
the user that no action will be taken.
Fixes: #17575
Gbp-Pq: Topic debian
Gbp-Pq: Name systemctl-do-not-shutdown-immediately-on-scheduled-shutdo.patch
Michael Biebl [Thu, 15 Oct 2020 21:11:01 +0000 (23:11 +0200)]
Move sysusers.d/sysctl.d/binfmt.d/modules-load.d back to /usr
In Debian, late mounting of /usr is no longer supported, so it is safe
to install those files in /usr.
We want those facilities in /usr, not /, as this will make an eventual
switch to a merged-usr setup easier.
Closes: #971282
Gbp-Pq: Topic debian
Gbp-Pq: Name Move-sysusers.d-sysctl.d-binfmt.d-modules-load.d-back-to-.patch
Michael Biebl [Mon, 17 Aug 2020 20:11:19 +0000 (22:11 +0200)]
Keep journal files compatible with older versions
Disable the KEYED-HASH journal feature by default and keep LZ4 (instead
of ZSTD) as default compression for new journal files. Otherwise journal
files are incompatible and can't be read by older journalctl
implementations.
This patch can be dropped in bullseye+1, as journalctl from bullseye
will then be able to read journal files with those features.
Closes: #968055
Gbp-Pq: Topic debian
Gbp-Pq: Name Keep-journal-files-compatible-with-older-versions.patch
Michael Biebl [Tue, 19 Nov 2019 08:10:23 +0000 (09:10 +0100)]
udev: drop SystemCallArchitectures=native from systemd-udevd.service
We can't really control what helper programs are run from other udev
rules. E.g. running i386 binaries under amd64 is a valid use case and
should not trigger a SIGSYS failure.
Closes: #869719
Gbp-Pq: Topic debian
Gbp-Pq: Name udev-drop-SystemCallArchitectures-native-from-systemd-ude.patch
Michael Biebl [Wed, 18 Jul 2018 21:49:16 +0000 (23:49 +0200)]
Drop seccomp system call filter for udev
The seccomp based system call whitelist requires at least systemd 239 to
be the active init and during a dist-upgrade we can't guarantee that
systemd has been fully configured before udev is restarted.
Martin Pitt [Wed, 18 Jan 2017 10:21:35 +0000 (11:21 +0100)]
Add env variable for machine ID path
During package build, in minimal chroots, or other systems which do not already
have an /etc/machine-id we get six test failures. Introduce a
$SYSTEMD_MACHINE_ID_PATH environment variable which can specify a location
other than /etc/machine-id, so that the unit tests are independent from the
environment.
Also adjust test-fs-util to not assume that /etc/machine-id exists. Use
/etc/passwd instead which is created by base-files.
Martin Pitt [Sat, 27 Feb 2016 11:27:06 +0000 (12:27 +0100)]
Revert "core: set RLIMIT_CORE to unlimited by default"
Partially revert commit 15a900327ab as this completely breaks core dumps
without systemd-coredump. It's also contradicting core(8), and it's not
systemd's place to redefine the kernel definitions of core files.
Commit bdfd7b2c now honours the process' RLIMIT_CORE for systemd-coredump. This
isn't what RLIMIT_CORE is supposed to do (it limits the size of the core
*file*, but the kernel deliberately ignores it for piping), so set a static
2^63 core size limit for systemd-coredump to go back to the previous behaviour
(otherwise the change above would break systemd-coredump).
Bug-Debian: https://bugs.debian.org/815020
Gbp-Pq: Topic debian
Gbp-Pq: Name Revert-core-set-RLIMIT_CORE-to-unlimited-by-default.patch
Martin Pitt [Mon, 27 Apr 2015 13:29:13 +0000 (15:29 +0200)]
Revert "core: one step back again, for nspawn we actually can't wait for cgroups running empty since systemd will get exactly zero notifications about it"
Didier Roche [Fri, 22 May 2015 11:04:38 +0000 (13:04 +0200)]
fsckd daemon for inter-fsckd communication
Global logic:
Add systemd-fsckd multiplexer which accepts multiple (via systemd-fsck's
/run/systemd/fsck.progress socket) fsck instances to connect to it and sends
progress report. systemd-fsckd then computes and writes to /dev/console the
number of devices currently being checked and the minimum fsck progress.
Plymouth and user interaction:
Forward the progress to plymouth and support canellation of in progress fsck.
Try to connect and send to plymouth (if running) some checked report progress,
using direct plymouth protocole.
Update message is the following:
fsckd:<num_devices>:<progress>:<string>
* num_devices corresponds to the current number of devices being checked (int)
* progress corresponds to the current minimum percentage of all devices being
checked (float, from 0 to 100)
* string is a translated message ready to be displayed by the plymouth theme
displaying the information above. It can be overridden by plymouth themes
supporting i18n.
Grab in fsckd plymouth watch key Control+C, and propagate this cancel request
to systemd-fsck which will terminate fsck.
Send a message to signal to user what key we are grabbing for fsck cancel.
Message is: fsckd-cancel-msg:<string>
Where string is a translated string ready to be displayed by the plymouth theme
indicating that Control+C can be used to cancel current checks. It can be
overridden (matching only fsckd-cancel-msg prefix) for themes supporting i18n.
Misc:
systemd-fsckd stops on idle when no fsck is connected.
Add man page explaining the plymouth theme protocol, usage of the daemon
as well as the socket activation part. Adapt existing fsck man page.
Note that fsckd had lived in the upstream tree for a while, but was removed.
More information at
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
-
Gbp-Pq: Topic debian
Gbp-Pq: Name fsckd-daemon-for-inter-fsckd-communication.patch
Martin Pitt [Mon, 9 Feb 2015 09:53:43 +0000 (10:53 +0100)]
Only start logind if dbus is installed
logind fails to start in environments without dbus, such as LXC containers or
servers. Add a startup condition to avoid the very noisy startup failure.
Part of #772700
Gbp-Pq: Topic debian
Gbp-Pq: Name Only-start-logind-if-dbus-is-installed.patch
for details. Once we grow a journal.conf.d/ directory, sysloggers can be moved
to pulling from the journal one by one and disable forwarding again in such a
conf.d snippet.
Gbp-Pq: Topic debian
Gbp-Pq: Name Re-enable-journal-forwarding-to-syslog.patch
systemd does not support non-mainline kernel features so upstream rejected this
patch.
It is however required for systemd integration by tuxonice-userui package.
Michael Biebl [Thu, 4 Sep 2014 23:15:16 +0000 (01:15 +0200)]
Make /run/lock tmpfs an API fs
The /run/lock directory is world-writable in Debian due to historic
reasons. To avoid user processes filling up /run, we mount a separate
tmpfs for /run/lock. As this directory needs to be available during
early boot, we make it an API fs.
Drop it from tmpfiles.d/legacy.conf to not clobber the permissions.
Closes: #751392
Gbp-Pq: Topic debian
Gbp-Pq: Name Make-run-lock-tmpfs-an-API-fs.patch
Jan Tojnar [Sat, 2 Jan 2021 01:46:33 +0000 (02:46 +0100)]
pkg-config: make prefix overridable again
While we don't support prefix being != /usr, and this is hardcoded
all over the place, variables in pkg-config file are expected
to have overridable base directory.
This is important for at least the following two use cases:
- Installing projects to non-FHS package-specific prefixes for Nix-style
package managers. Of course, it is then their responsibility
to ensure systemd can find the service files.
- Installing to local path for development purposes.
This is a compromise between running a program from a build directory,
and running it fully installed to system prefix.
You will not want to write to system prefix in either case.
For more information, see also
https://www.bassi.io/articles/2018/03/15/pkg-config-and-paths/
rules: Move ID_SMARTCARD_READER definition to a <70 configuration.
70-uaccess.rules sets the uaccess tag on devices with ID_SMARTCARD_READER
set, but it is set in 99-systemd.rules .
Move this to a 60-*.rules which already matches USB CCID class, factorising
the matching, so 70-uaccess.rules sets up these devices as expected.
Nominally, the bug was in unit_load_dropin(), which just took the last mtime
instead of calculating the maximum. But instead of adding code to wrap the
loop, this patch goes in the other direction.
All (correct) callers of config_parse() followed a very similar pattern to
calculate the maximum mtime. So let's simplify things by making config_parse()
assume that mtime is initialized and update it to the maximum. This makes all
the callers that care about mtime simpler and also fixes the issue in
unit_load_dropin().
config_parse_many_nulstr() and config_parse_many() are different, because it
makes sense to call them just once, and current ret_mtime behaviour make sense.
Matthias Klumpp [Fri, 8 Jan 2021 22:59:38 +0000 (23:59 +0100)]
localed: Run locale-gen if available to generate missing locale
This change improves integration with distributions using locale-gen to
generate missing locale on-demand, like Debian-based distributions
(Debian/Ubuntu/PureOS/Tanglu/...) and Arch Linux.
We only ever enable new locales for generation, and never disable them.
Furthermore, we only generate UTF-8 locale.
This feature is only used if explicitly enabled at compile-time, and
will also be inert at runtime if the locale-gen binary is missing.
Michael Biebl [Thu, 11 Mar 2021 17:09:35 +0000 (17:09 +0000)]
systemd (247.3-3) unstable; urgency=medium
* pkg-config: make prefix overridable again (Closes: #984763)
* Revert "units: turn off DNSSEC validation when timesyncd resolves
hostnames"
Support for SYSTEMD_NSS_RESOLVE_VALIDATE=0 requires the changes from
https://github.com/systemd/systemd/pull/17823 for the dnssec bypass
logic. Those are rather invasive changes and not suitable for a stable
backport.
systemctl: do not shutdown immediately on scheduled shutdown
When, for whatever reason, a scheduled shutdown fails to be set, systemd
will proceed with immediate shutdown without allowing the user to react.
This is counterintuitive because when a scheduled shutdown is issued,
it means the user wants to shutdown at a specified time in the future,
not immediately. This patch prevents the immediate shutdown and informs
the user that no action will be taken.
Fixes: #17575
Gbp-Pq: Topic debian
Gbp-Pq: Name systemctl-do-not-shutdown-immediately-on-scheduled-shutdo.patch
Michael Biebl [Thu, 15 Oct 2020 21:11:01 +0000 (23:11 +0200)]
Move sysusers.d/sysctl.d/binfmt.d/modules-load.d back to /usr
In Debian, late mounting of /usr is no longer supported, so it is safe
to install those files in /usr.
We want those facilities in /usr, not /, as this will make an eventual
switch to a merged-usr setup easier.
Closes: #971282
Gbp-Pq: Topic debian
Gbp-Pq: Name Move-sysusers.d-sysctl.d-binfmt.d-modules-load.d-back-to-.patch
Michael Biebl [Mon, 17 Aug 2020 20:11:19 +0000 (22:11 +0200)]
Keep journal files compatible with older versions
Disable the KEYED-HASH journal feature by default and keep LZ4 (instead
of ZSTD) as default compression for new journal files. Otherwise journal
files are incompatible and can't be read by older journalctl
implementations.
This patch can be dropped in bullseye+1, as journalctl from bullseye
will then be able to read journal files with those features.
Closes: #968055
Gbp-Pq: Topic debian
Gbp-Pq: Name Keep-journal-files-compatible-with-older-versions.patch
Michael Biebl [Tue, 19 Nov 2019 08:10:23 +0000 (09:10 +0100)]
udev: drop SystemCallArchitectures=native from systemd-udevd.service
We can't really control what helper programs are run from other udev
rules. E.g. running i386 binaries under amd64 is a valid use case and
should not trigger a SIGSYS failure.
Closes: #869719
Gbp-Pq: Topic debian
Gbp-Pq: Name udev-drop-SystemCallArchitectures-native-from-systemd-ude.patch
Michael Biebl [Wed, 18 Jul 2018 21:49:16 +0000 (23:49 +0200)]
Drop seccomp system call filter for udev
The seccomp based system call whitelist requires at least systemd 239 to
be the active init and during a dist-upgrade we can't guarantee that
systemd has been fully configured before udev is restarted.
Martin Pitt [Wed, 18 Jan 2017 10:21:35 +0000 (11:21 +0100)]
Add env variable for machine ID path
During package build, in minimal chroots, or other systems which do not already
have an /etc/machine-id we get six test failures. Introduce a
$SYSTEMD_MACHINE_ID_PATH environment variable which can specify a location
other than /etc/machine-id, so that the unit tests are independent from the
environment.
Also adjust test-fs-util to not assume that /etc/machine-id exists. Use
/etc/passwd instead which is created by base-files.
Martin Pitt [Sat, 27 Feb 2016 11:27:06 +0000 (12:27 +0100)]
Revert "core: set RLIMIT_CORE to unlimited by default"
Partially revert commit 15a900327ab as this completely breaks core dumps
without systemd-coredump. It's also contradicting core(8), and it's not
systemd's place to redefine the kernel definitions of core files.
Commit bdfd7b2c now honours the process' RLIMIT_CORE for systemd-coredump. This
isn't what RLIMIT_CORE is supposed to do (it limits the size of the core
*file*, but the kernel deliberately ignores it for piping), so set a static
2^63 core size limit for systemd-coredump to go back to the previous behaviour
(otherwise the change above would break systemd-coredump).
Bug-Debian: https://bugs.debian.org/815020
Gbp-Pq: Topic debian
Gbp-Pq: Name Revert-core-set-RLIMIT_CORE-to-unlimited-by-default.patch
Martin Pitt [Mon, 27 Apr 2015 13:29:13 +0000 (15:29 +0200)]
Revert "core: one step back again, for nspawn we actually can't wait for cgroups running empty since systemd will get exactly zero notifications about it"
Didier Roche [Fri, 22 May 2015 11:04:38 +0000 (13:04 +0200)]
fsckd daemon for inter-fsckd communication
Global logic:
Add systemd-fsckd multiplexer which accepts multiple (via systemd-fsck's
/run/systemd/fsck.progress socket) fsck instances to connect to it and sends
progress report. systemd-fsckd then computes and writes to /dev/console the
number of devices currently being checked and the minimum fsck progress.
Plymouth and user interaction:
Forward the progress to plymouth and support canellation of in progress fsck.
Try to connect and send to plymouth (if running) some checked report progress,
using direct plymouth protocole.
Update message is the following:
fsckd:<num_devices>:<progress>:<string>
* num_devices corresponds to the current number of devices being checked (int)
* progress corresponds to the current minimum percentage of all devices being
checked (float, from 0 to 100)
* string is a translated message ready to be displayed by the plymouth theme
displaying the information above. It can be overridden by plymouth themes
supporting i18n.
Grab in fsckd plymouth watch key Control+C, and propagate this cancel request
to systemd-fsck which will terminate fsck.
Send a message to signal to user what key we are grabbing for fsck cancel.
Message is: fsckd-cancel-msg:<string>
Where string is a translated string ready to be displayed by the plymouth theme
indicating that Control+C can be used to cancel current checks. It can be
overridden (matching only fsckd-cancel-msg prefix) for themes supporting i18n.
Misc:
systemd-fsckd stops on idle when no fsck is connected.
Add man page explaining the plymouth theme protocol, usage of the daemon
as well as the socket activation part. Adapt existing fsck man page.
Note that fsckd had lived in the upstream tree for a while, but was removed.
More information at
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
-
Gbp-Pq: Topic debian
Gbp-Pq: Name fsckd-daemon-for-inter-fsckd-communication.patch
Martin Pitt [Mon, 9 Feb 2015 09:53:43 +0000 (10:53 +0100)]
Only start logind if dbus is installed
logind fails to start in environments without dbus, such as LXC containers or
servers. Add a startup condition to avoid the very noisy startup failure.
Part of #772700
Gbp-Pq: Topic debian
Gbp-Pq: Name Only-start-logind-if-dbus-is-installed.patch
for details. Once we grow a journal.conf.d/ directory, sysloggers can be moved
to pulling from the journal one by one and disable forwarding again in such a
conf.d snippet.
Gbp-Pq: Topic debian
Gbp-Pq: Name Re-enable-journal-forwarding-to-syslog.patch
systemd does not support non-mainline kernel features so upstream rejected this
patch.
It is however required for systemd integration by tuxonice-userui package.
Michael Biebl [Thu, 4 Sep 2014 23:15:16 +0000 (01:15 +0200)]
Make /run/lock tmpfs an API fs
The /run/lock directory is world-writable in Debian due to historic
reasons. To avoid user processes filling up /run, we mount a separate
tmpfs for /run/lock. As this directory needs to be available during
early boot, we make it an API fs.
Drop it from tmpfiles.d/legacy.conf to not clobber the permissions.
Closes: #751392
Gbp-Pq: Topic debian
Gbp-Pq: Name Make-run-lock-tmpfs-an-API-fs.patch
Matthias Klumpp [Fri, 8 Jan 2021 22:59:38 +0000 (23:59 +0100)]
localed: Run locale-gen if available to generate missing locale
This change improves integration with distributions using locale-gen to
generate missing locale on-demand, like Debian-based distributions
(Debian/Ubuntu/PureOS/Tanglu/...) and Arch Linux.
We only ever enable new locales for generation, and never disable them.
Furthermore, we only generate UTF-8 locale.
This feature is only used if explicitly enabled at compile-time, and
will also be inert at runtime if the locale-gen binary is missing.
systemctl: do not shutdown immediately on scheduled shutdown
When, for whatever reason, a scheduled shutdown fails to be set, systemd
will proceed with immediate shutdown without allowing the user to react.
This is counterintuitive because when a scheduled shutdown is issued,
it means the user wants to shutdown at a specified time in the future,
not immediately. This patch prevents the immediate shutdown and informs
the user that no action will be taken.
Fixes: #17575
Gbp-Pq: Topic debian
Gbp-Pq: Name systemctl-do-not-shutdown-immediately-on-scheduled-shutdo.patch
Michael Biebl [Thu, 15 Oct 2020 21:11:01 +0000 (23:11 +0200)]
Move sysusers.d/sysctl.d/binfmt.d/modules-load.d back to /usr
In Debian, late mounting of /usr is no longer supported, so it is safe
to install those files in /usr.
We want those facilities in /usr, not /, as this will make an eventual
switch to a merged-usr setup easier.
Closes: #971282
Gbp-Pq: Topic debian
Gbp-Pq: Name Move-sysusers.d-sysctl.d-binfmt.d-modules-load.d-back-to-.patch
Michael Biebl [Mon, 17 Aug 2020 20:11:19 +0000 (22:11 +0200)]
Keep journal files compatible with older versions
Disable the KEYED-HASH journal feature by default and keep LZ4 (instead
of ZSTD) as default compression for new journal files. Otherwise journal
files are incompatible and can't be read by older journalctl
implementations.
This patch can be dropped in bullseye+1, as journalctl from bullseye
will then be able to read journal files with those features.
Closes: #968055
Gbp-Pq: Topic debian
Gbp-Pq: Name Keep-journal-files-compatible-with-older-versions.patch
Michael Biebl [Tue, 19 Nov 2019 08:10:23 +0000 (09:10 +0100)]
udev: drop SystemCallArchitectures=native from systemd-udevd.service
We can't really control what helper programs are run from other udev
rules. E.g. running i386 binaries under amd64 is a valid use case and
should not trigger a SIGSYS failure.
Closes: #869719
Gbp-Pq: Topic debian
Gbp-Pq: Name udev-drop-SystemCallArchitectures-native-from-systemd-ude.patch
Michael Biebl [Wed, 18 Jul 2018 21:49:16 +0000 (23:49 +0200)]
Drop seccomp system call filter for udev
The seccomp based system call whitelist requires at least systemd 239 to
be the active init and during a dist-upgrade we can't guarantee that
systemd has been fully configured before udev is restarted.
Martin Pitt [Wed, 18 Jan 2017 10:21:35 +0000 (11:21 +0100)]
Add env variable for machine ID path
During package build, in minimal chroots, or other systems which do not already
have an /etc/machine-id we get six test failures. Introduce a
$SYSTEMD_MACHINE_ID_PATH environment variable which can specify a location
other than /etc/machine-id, so that the unit tests are independent from the
environment.
Also adjust test-fs-util to not assume that /etc/machine-id exists. Use
/etc/passwd instead which is created by base-files.
Martin Pitt [Sat, 27 Feb 2016 11:27:06 +0000 (12:27 +0100)]
Revert "core: set RLIMIT_CORE to unlimited by default"
Partially revert commit 15a900327ab as this completely breaks core dumps
without systemd-coredump. It's also contradicting core(8), and it's not
systemd's place to redefine the kernel definitions of core files.
Commit bdfd7b2c now honours the process' RLIMIT_CORE for systemd-coredump. This
isn't what RLIMIT_CORE is supposed to do (it limits the size of the core
*file*, but the kernel deliberately ignores it for piping), so set a static
2^63 core size limit for systemd-coredump to go back to the previous behaviour
(otherwise the change above would break systemd-coredump).
Bug-Debian: https://bugs.debian.org/815020
Gbp-Pq: Topic debian
Gbp-Pq: Name Revert-core-set-RLIMIT_CORE-to-unlimited-by-default.patch
Martin Pitt [Mon, 27 Apr 2015 13:29:13 +0000 (15:29 +0200)]
Revert "core: one step back again, for nspawn we actually can't wait for cgroups running empty since systemd will get exactly zero notifications about it"
Didier Roche [Fri, 22 May 2015 11:04:38 +0000 (13:04 +0200)]
fsckd daemon for inter-fsckd communication
Global logic:
Add systemd-fsckd multiplexer which accepts multiple (via systemd-fsck's
/run/systemd/fsck.progress socket) fsck instances to connect to it and sends
progress report. systemd-fsckd then computes and writes to /dev/console the
number of devices currently being checked and the minimum fsck progress.
Plymouth and user interaction:
Forward the progress to plymouth and support canellation of in progress fsck.
Try to connect and send to plymouth (if running) some checked report progress,
using direct plymouth protocole.
Update message is the following:
fsckd:<num_devices>:<progress>:<string>
* num_devices corresponds to the current number of devices being checked (int)
* progress corresponds to the current minimum percentage of all devices being
checked (float, from 0 to 100)
* string is a translated message ready to be displayed by the plymouth theme
displaying the information above. It can be overridden by plymouth themes
supporting i18n.
Grab in fsckd plymouth watch key Control+C, and propagate this cancel request
to systemd-fsck which will terminate fsck.
Send a message to signal to user what key we are grabbing for fsck cancel.
Message is: fsckd-cancel-msg:<string>
Where string is a translated string ready to be displayed by the plymouth theme
indicating that Control+C can be used to cancel current checks. It can be
overridden (matching only fsckd-cancel-msg prefix) for themes supporting i18n.
Misc:
systemd-fsckd stops on idle when no fsck is connected.
Add man page explaining the plymouth theme protocol, usage of the daemon
as well as the socket activation part. Adapt existing fsck man page.
Note that fsckd had lived in the upstream tree for a while, but was removed.
More information at
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
-
Gbp-Pq: Topic debian
Gbp-Pq: Name fsckd-daemon-for-inter-fsckd-communication.patch
Martin Pitt [Mon, 9 Feb 2015 09:53:43 +0000 (10:53 +0100)]
Only start logind if dbus is installed
logind fails to start in environments without dbus, such as LXC containers or
servers. Add a startup condition to avoid the very noisy startup failure.
Part of #772700
Gbp-Pq: Topic debian
Gbp-Pq: Name Only-start-logind-if-dbus-is-installed.patch
for details. Once we grow a journal.conf.d/ directory, sysloggers can be moved
to pulling from the journal one by one and disable forwarding again in such a
conf.d snippet.
Gbp-Pq: Topic debian
Gbp-Pq: Name Re-enable-journal-forwarding-to-syslog.patch
systemd does not support non-mainline kernel features so upstream rejected this
patch.
It is however required for systemd integration by tuxonice-userui package.
Michael Biebl [Thu, 4 Sep 2014 23:15:16 +0000 (01:15 +0200)]
Make /run/lock tmpfs an API fs
The /run/lock directory is world-writable in Debian due to historic
reasons. To avoid user processes filling up /run, we mount a separate
tmpfs for /run/lock. As this directory needs to be available during
early boot, we make it an API fs.
Drop it from tmpfiles.d/legacy.conf to not clobber the permissions.
Closes: #751392
Gbp-Pq: Topic debian
Gbp-Pq: Name Make-run-lock-tmpfs-an-API-fs.patch
Matthias Klumpp [Fri, 8 Jan 2021 22:59:38 +0000 (23:59 +0100)]
localed: Run locale-gen if available to generate missing locale
This change improves integration with distributions using locale-gen to
generate missing locale on-demand, like Debian-based distributions
(Debian/Ubuntu/PureOS/Tanglu/...) and Arch Linux.
We only ever enable new locales for generation, and never disable them.
Furthermore, we only generate UTF-8 locale.
This feature is only used if explicitly enabled at compile-time, and
will also be inert at runtime if the locale-gen binary is missing.
Upgrading to qemu 5.2 breaks TEST-36-NUMAPOLICY like:
qemu-system-x86_64: total memory for NUMA nodes (0x0) should
equal RAM size (0x20000000)
Use the new (as in >=2014) form of memdev in test 36:
-object memory-backend-ram,id=mem0,size=512M -numa node,memdev=mem0,nodeid=0
Since some target systems are as old as qemu 1.5.3 (CentOS7) but the new
kind to specify was added in qemu 2.1 this needs to add version parsing and
add the argument only when qemu is >=5.2.
So the currentl and only fd_is_mount_point() check is actually entirely
bogus: it passes "/" as filename argument, but that's not actually a
a valid filename, but an absolute path.
fd_is_mount_point() is written in a way tha the fd refers to a directory
and the specified path is a file directly below it that shall be
checked. The test call actually violated that rule, but still expected
success.
Let's fix this, and check for this explicitly, and refuse it.
Let's extend the test and move it to test-mountpoint-util.c where the
rest of the tests for related calls are placed.
Michael Biebl [Mon, 18 Jan 2021 12:45:15 +0000 (12:45 +0000)]
systemd (247.2-5) unstable; urgency=medium
[ Matthias Klumpp ]
* Configure localed to run locale-gen to generate missing locale.
This applies an (upstreamed) patch to permit systemd-localed to run
locale-gen to generate missing locale when requested to switch the
system locale.
This makes localectl usable on Debian for changing locale without
breaking system localization or even prevent certain applications from
running at all after switching to a non-generated locale.
[ Michael Biebl ]
* systemctl: do not shutdown immediately on scheduled shutdown.
When, for whatever reason, a scheduled shutdown fails to be set, systemd
will proceed with immediate shutdown without allowing the user to react.
This is counterintuitive because when a scheduled shutdown is issued,
it means the user wants to shutdown at a specified time in the future,
not immediately. (Closes: #931235)
* test: disable DnsmasqClientTest.test_resolved_etc_hosts in
networkd-test.py.
This test appears to be flaky.
See: #979716
* Bump Standards-Version to 4.5.1
* Set upstream metadata fields: Bug-Submit, Bug-Database, Repository,
Repository-Browse
Michael Biebl [Thu, 15 Oct 2020 21:11:01 +0000 (23:11 +0200)]
Move sysusers.d/sysctl.d/binfmt.d/modules-load.d back to /usr
In Debian, late mounting of /usr is no longer supported, so it is safe
to install those files in /usr.
We want those facilities in /usr, not /, as this will make an eventual
switch to a merged-usr setup easier.
Closes: #971282
Gbp-Pq: Topic debian
Gbp-Pq: Name Move-sysusers.d-sysctl.d-binfmt.d-modules-load.d-back-to-.patch
Michael Biebl [Mon, 17 Aug 2020 20:11:19 +0000 (22:11 +0200)]
Keep journal files compatible with older versions
Disable the KEYED-HASH journal feature by default and keep LZ4 (instead
of ZSTD) as default compression for new journal files. Otherwise journal
files are incompatible and can't be read by older journalctl
implementations.
This patch can be dropped in bullseye+1, as journalctl from bullseye
will then be able to read journal files with those features.
Closes: #968055
Gbp-Pq: Topic debian
Gbp-Pq: Name Keep-journal-files-compatible-with-older-versions.patch
Michael Biebl [Tue, 19 Nov 2019 08:10:23 +0000 (09:10 +0100)]
udev: drop SystemCallArchitectures=native from systemd-udevd.service
We can't really control what helper programs are run from other udev
rules. E.g. running i386 binaries under amd64 is a valid use case and
should not trigger a SIGSYS failure.
Closes: #869719
Gbp-Pq: Topic debian
Gbp-Pq: Name udev-drop-SystemCallArchitectures-native-from-systemd-ude.patch
Michael Biebl [Wed, 18 Jul 2018 21:49:16 +0000 (23:49 +0200)]
Drop seccomp system call filter for udev
The seccomp based system call whitelist requires at least systemd 239 to
be the active init and during a dist-upgrade we can't guarantee that
systemd has been fully configured before udev is restarted.
Martin Pitt [Wed, 18 Jan 2017 10:21:35 +0000 (11:21 +0100)]
Add env variable for machine ID path
During package build, in minimal chroots, or other systems which do not already
have an /etc/machine-id we get six test failures. Introduce a
$SYSTEMD_MACHINE_ID_PATH environment variable which can specify a location
other than /etc/machine-id, so that the unit tests are independent from the
environment.
Also adjust test-fs-util to not assume that /etc/machine-id exists. Use
/etc/passwd instead which is created by base-files.
projects / systemd.git / log